Help Center

Back to home

Help Center

Metal Roofing

Metal Roofing

What substrate should metal roofing panels be installed on?

Why are the edges of my painted galvanized roof rusting?

I installed a metal roof years ago and it is starting to have problem areas. What can I do?

What is the spanning between supports for 29 gauge metal roof panels?

Are the painted SM-RIB Panels Painted on Both Sides?

Can Metal Roofing Panels Be Painted?

Can a Metal Roofing Panel Be Attached Directly To Wood Studs for Walls?

Will a Metal Roofing Panel Rust if it is Not Painted?

How much does a standard metal roofing panel weigh?

What is the total width of a 10 ft Corrugated Metal Roofing Panel?

Can I repaint metal roofing panels?

Where are fastening schedules located for metal roofing panels?

Metal Roofing

What's the best underlayment for the 16 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel?

How wide are the 10 ft. Corrugated Galvanized Steel 29-Gauge Roof Panels?

Would the 6 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel be appropriate as walls/door for an outdoor shower?

How do you install the 10 ft. Corrugated Ridge Cap Roll Flashing Galvanized Steel on a "lean-to" style shop roof?

How wide is the 8 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel?

Can the 6.25 in. x 6.25 in. PVC Base Vent Pipe Flashing with Adjustable Rubber Collar work with a flashing with a six inch opening?

What is the maximum span of the 10 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel?

Do you overlap at the first ridge or second for the 8 ft. SM-Rib Galvanized Steel 29-Gauge Roof Panel?

What gauges are available for the 10 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel?

Can you walk on the 12 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel?

Can the 10 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel be cut with a saw blade?

What are the dimensions of the 6 ft. Closure Strip Wood Corrugated Roof Accessory?

Are the 16 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panels painted on both sides?

What fasteners are recommended for the 10 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel?

Is the 12 ft. 5V Crimp Galvanized Steel 29-Gauge Roof Panel material appropriate for rainwater catchment to be used for potable drinking water?

Can the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel be used as a raised bed garden planter?

How do you get a rust finish on the 8 ft. Corrugated Galvanized Steel 29-Gauge Roof Panels?

How does the 6.25 in. PVC Base Vent Pipe Flashing with Adjustable Rubber Collar seal to the metal base on the roof ?

If installed as a privacy fence, will the 12 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel hold up to heavy wind?

Can the 10 ft. Ridge Cap Galvanized Steel 29-Gauge Corrugated Roof Flashing be painted?

Can the 10 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel withstand heat if used for the patio?

Is this 10 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel paintable?

Can the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel come in direct contact with pressure-treated lumber?

Does plywood need to be placed under the 10 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel if using it for a roof?

Are the 8 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panels painted gray on both sides?

How long is the 16 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel built to last?

Can the 10 ft. Galvanized Steel Water Rain Diverter Drip Edge Flashing be painted?

Can the 10 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel be painted?

What steps should be taken if the 10 ft. 5V Crimp Galvanized Steel 29-Gauge Roof Panel leaks during installation?

Will the 8 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel rust after cutting?

Can the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel be used on kitchen walls?

Is the 12 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel strong enough to support the weight of a person?

Can the 8 ft. SM-Rib Galvanized Steel 29-Gauge Roof Panel be used like siding?

Can the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel be used below ground level?

Can the 12 ft. 5V Crimp Galvanized Steel 29-Gauge Roof Panel be installed over an existing roof with asphalt shingles?

Would the 8 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel work as a radiant barrier?

What is the width of a 12 foot 5V Crimp Galvanized Steel 29-Gauge Roofing Panel?

Will the 8 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel rust?

Can the 3 ft. Outside Closure Strip Foam SM-Rib Roof Accessory be painted with a sealer after installation?

What is the best tool to cut the 8 ft. SM-Rib Galvanized Steel 29-Gauge Roof Panel?

How do you screw in the fasteners on the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panels?

Is the 6 in. x 12 ft. Royal Brown Aluminum Smooth Fascia Trim paintable?

Can the 10 ft. 5V Crimp Galvanized Steel 29-Gauge Roof Panel metal roofing be used over shingles?

Can the 1-1/2 in. Wood Screw #10 Galvanized Hex-Head Roof Accessory work to secure metal flashing on a composite shingle roof?

Can the 8 ft. Corrugated Galvanized Steel 31-Gauge Roof Panel be painted without priming?

Is a wall connection needed for the 10 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel?

What is the best way to cut the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel?

Is the 8 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel paintable?

Will the 8 ft. Corrugated Galvanized Steel 31-Gauge Roof Panel work for an indoor shower?

Can the 16 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel be installed directly over an asphalt shingled roof?

Is the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel roofing noisy during a storm?

How do I install the Zinc Moss Control 50 ft. Roll with Nails?

What is the life expectancy for the 6 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel?

Can the 12 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel be painted?

Does the 8 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel lose its shine after installation?

Is the finished width of 12 foot Corrugated Galvanized Steel 29-Gauge Roof Panel 24 inches wide? Is there extra width for overlap?

What is the length of the drip edge side on the 10 ft. 29-Gauge Galvalume EF3 Eave Flashing?

Can the 10 ft. Corrugated Ridge Cap Roll Flashing Galvanized Steel be painted?

Can the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panels be painted?

Can the 8 ft. SM-Rib Galvanized Steel 29-Gauge Roof Panel be stepped on?

Can the 8 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel be used on a flat roof?

Can the 12 ft. 5V Crimp Galvanized Steel 29-Gauge Roof Panel be used over a salt water pool?

Can the 10 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panels bend?

Is the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel able to support melting snow run off from under a traditional wood or poly deck?

What is the rib height of the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel?

How many 10 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panels are needed for a 10 x 60 foot roof?

Can woodpeckers peck through the 25 ft. Aluminum Roll Valley Flashing?

What is the fire rating for the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel?

What is the minimum slope the 12 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panels can accommodate?

Can the 8 ft. 5V Crimp Galvalume Steel 26-Gauge Roof Panel in Aluminum be painted?

How wide is the 12 ft. SM-Rib Galvanized Steel 29-Gauge Roof Panel?

Can the 5 ft. Aluminum Rain Diverter Flashing be installed with residential architectural roof shingles?

Can the 12 ft. 5V Crimp Galvanized Steel 29-Gauge Roof Panel be painted?

Can the 16 ft. SM-Rib Galvanized Steel 29-Gauge Roof Panel work on a low pitch?

Will the fasteners on the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel leak?

Is the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel paintable?

How wide is the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel?

Can the 10 ft. 29-Gauge Galvalume EF3 Eave Flashing drip-edge be painted with an exterior latex house paint?

Can the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel support the weight of someone walking on them?

What size socket is needed to drive the 1-1/2 in. Wood Screw #10 Galvanized Hex-Head Roof Accessory?

Can the 50 ft. Butyl Sealant Tape Roof Accessory be used to seal RV windows?

What is the best way to cut the 8 ft. Corrugated Galvanized Steel 31-Gauge Roof Panel for an exposed edge?

Can the 6 in. x 10 ft. Aluminum Roll Valley Flashing be used to make a door sill pan?

Can the 8 ft. Corrugated Galvanized Steel 29-Gauge Roof Panels be bent?

Can the 12 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panels be primed and painted over?

Can the 10 ft. SM-Rib Galvanized Steel 29-Gauge Roof Panel be cut cross ways with a circular saw?

How heavy is the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel?

What is the coverage of the 10 ft. 5V Crimp Galvanized Steel 29-Gauge Roof Panel?

Can 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel be painted?

Can the 8 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel be installed over shingles ?

How do you cut the 6 ft. Corrugated Galvanized Steel 31-Gauge Roof Panel?

Can the 8 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel mount on a concrete wall?

What is the gauge or thickness of the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel?

Can the 6 in. x 10 ft. Aluminum Roll Valley Flashing be painted?

What's the easiest way to cut the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel?

How do you flash the 10 ft. 5V Crimp Galvanized Steel 29-Gauge Roof Panel against a brick wall?

Are both sides of the 10 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel the same color?

Can the 8 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel be used for siding?

Can the 8 ft. Corrugated Galvanized Steel 29-Gauge Roof Panels be painted?

Can the 16 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel be cut to length?

Can the metal on the 8 ft. Corrugated Galvanized Steel 31-Gauge Roof Panel be bent?

How much does a 16 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel weigh?

How many inches or feet wide are the 16 ft. Corrugated Galvanized Steel 29-Gauge Roof Panels?

Can the 25 ft. Aluminum Roll Valley Flashing be used to make cookie cutters?

Can the 12 ft. SM-Rib Galvanized Steel 29-Gauge Roof Panel work for skirting?

How can I achieve a rusted look on the 8 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel?

Can the 8 ft. Corrugated Galvanized Steel 31-Gauge Roof Panel be attached directly to the rafters without plywood?

Can the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel work with pressure treated lumber?

Is the 8 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel painted on both sides?

Can the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel be cut?

Can you paint the 12 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel?

How wide is the 16 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel?

Can the 16 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel be installed on top rafters?

Can the 6 in. Adjustable Pitch Galvanized Steel Pipe Flashing be use as a hot water heater exhaust vent on a roof?

Can the 8 ft. SM-Rib Galvanized Steel 29-Gauge Roof Panel in Cotton White be painted a different color?

Can the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel be used as a raised bed planter?

How do you join the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel together to make raised garden planters?

What is the width of the 6 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel?

Are the 10 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panels prepainted?

How wide is the 10 ft. Slate 29-Gauge Galvalume Steel RC2 Ridge Cap Flashing?

Is the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel rust proof?

Can the 50 ft. Butyl Sealant Tape Roof Accessory be used to seal two peices of corrugated steel roof panels together?

How long can the 6.25 in. PVC Base Vent Pipe Flashing with Adjustable Rubber Collar last?

Can the 50 ft. Butyl Sealant Tape Roof Accessory be rolled or stretched thinner or double stacked thicker?

Can the 12 ft. Aluminum Cedar Texture Fascia Trim be used directly on roof rafter ends?

Can the 7.5 in. x 10 ft. Galvanized Steel Water Rain Diverter Drip Edge Flashing be painted?

Does the 3 ft. Outside Closure Strip Foam SM-Rib Roof Accessory have adhesive?

Can the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panels be used in a bathroom shower?

Can the 10 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel panels be walked on and is there a lighter metal panel?

Can the Galvanized Steel Water Rain Diverter Drip Edge Flashing be used to divert rain water from a chimney?

Does the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel provide hurricane protection?

Can the Zinc Moss Control 50 ft. Roll with Nails be glued to shingles using a quality construction adhesive?

What's the easiest way to cut the 8 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel?

Can the 12 ft. Corrugated Galvanized Steel 29-Gauge Roof Panels be installed over existing roof panels?

Is it necessary to pre-drill metal roofing material for the Wood Screw #10 Galvanized Hex-Head Roof Accessory?

What color is the underside of the 10 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel in Slate?

How pliable is the 8 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel sheet?

Can the 6 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel be used for a raised garden bed?

Can I overlap 8 ft. Corrugated Galvanized Steel 29-Gauge Roof Panels?

Does this 12 ft. 5V Crimp Galvanized Steel 29-Gauge Roof Panel have to be installed over plywood?

Does the 12 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel make a lot of noise when it rains?

Does the 12 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel make a lot of noise when it's raining?

Can you paint the 12 ft. 5V Crimp Galvalume Steel 26-Gauge Roof Panel?

How wide are the 8 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panels?

Does the 10 ft. 29-Gauge Galvalume Steel RC2 Ridge Cap Flashing in Red come in other colors?

What is the fastener spacing on the 12 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel?

Can the 12 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel be attached to the top of a pergola?

Can the 8 ft. Corrugated Galvalume Steel 26-Gauge Roof Panel in Aluminum be used for a gate in place of metal fence panels?

Is the 6 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel hot-dipped?

How many pieces of the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel are needed for a 20 ft. x 9 ft. roof?

Can the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel be used for an unfinished basement ceiling by nailing the metal sheets directly?

Is insulation needed for the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel?

How do you create an aged look for the 12 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel?

Can the 10 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel be installed over existing shingles?

Can the 12 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel be placed directly on the beams of a patio?

Are there cap ends for the 10 ft. Ridge Cap Galvalume Steel 26-Gauge Roof Flashing?

Will the Zinc Moss Control 50 ft. Roll with Nails hurt plants, such as rhododendrons and small trees, near the roof line?

What is the K-factor of a galvanized steel roof for the 10 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel?

If used on a patio, will the 12 ft. Corrugated Galvanized Steel 29-Gauge Roof Panels cause the heat to raise?

Can I use the 6 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel for the shower or bath?

Does the 14 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel come in a bright white color?

What tools are required to cut the 8 ft. Corrugated Galvanized Steel 31-Gauge Roof Panel?

Can the 12 ft. SM-Rib Galvanized Steel 29-Gauge Roof Panel be used for residential applications?

How much overhang is needed when installing the 12 ft. 5V Crimp Galvanized Steel 29-Gauge Roof Panel?

Is there insulation to go along with the 12 ft. 5V Crimp Galvanized Steel 29-Gauge Roof Panels?

Can the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel be painted?

How do you prevent the12 ft. 5V Crimp Galvanized Steel 29-Gauge Roof Panel from rusting?

How do you cut the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel?

Is the 10 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel rust resistant?

Does the 10 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel's material rust outdoors?

Will the 6 in. x 10 ft. Aluminum Roll Valley Flashing become faded and chalky?

Are the 8 ft. SM-Rib Galvanized Steel 29-Gauge Roof Panels painted on both sides?

What is the minimum or recommended slope when installing the 10 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel?

Can solar panels be attached to the 16 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel?

Can the 8 ft. 5V Crimp Galvalume Steel 26-Gauge Roof Panel in Aluminum be overlapped?

How wide is the 50 ft. Butyl Sealant Tape Roof Accessory?

Can the 10 ft. 5V Crimp Galvalume Steel 26-Gauge Roof Panel in Aluminum be painted with paint and primer?

Can the 10 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel be painted?

What is the width of the Zinc Moss Control 50 ft. Roll with Nails strip?

Is this 12 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel not as shiny as silver?

Is the surface of the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel shiny?

How would you flash a high eave for the 8 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel?

What is the best method to cut the 8 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel?

Can the 7.5 in. x 10 ft. Galvanized Steel Water Rain Diverter Drip Edge Flashing be used on a tin roof?

Can the 7.5 in. x 10 ft. Galvanized Steel Water Rain Diverter Drip Edge Flashing be cut?

Is the 8 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel easy to cut shorter?

Can the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel be used for fencing?

How to cut the 12 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel?

How do you cut the 8 ft. 5V Crimp Galvanized Steel 26-Gauge Roof Panel?

How do you install the 10 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panels?

Can the 6 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel be painted?

Is the 10 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel bendable?

Is the 12 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel painted on both sides?

Can the 10 ft. 5V Crimp Galvanized Steel 29-Gauge Roof Panel be installed in vertical wall applications?

Can the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel be painted?

Any recommendations for removing white stains on the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel?

Can the 8 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel be used on the underside of a deck to drain water into a gutter system under the deck?

How wide are the 12 ft. SM-Rib Galvanized Steel 29-Gauge Roof Panels?

Is the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel safe to use for making a raised vegetable garden bed?

How do you recommend the Zinc Moss Control 50 ft. Roll with Nails be installed on a concrete tile roof?

Can the 10 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel be trimmed with tin snips?

How many 10 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel sheets are needed to cover 120 inches?

Can the 10 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel be used for an under-deck application?

Can the 14 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel be placed over a slatted patio cover to keep out rain and sun?

What is the peak-to-peak distance for the 8 ft. Corrugated Galvanized Steel 26-Gauge Roof Panel?

Can the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel be put directly on top of plywood?

What is the width of the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel?

Can the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel be used as a exterior siding on a vintage travel trailer?

Can you get the Corrugated Galvanized Steel Utility-Gauge Roof Panel in 16 feet?

Is the 10 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel ready to paint or does it need to be prepped prior to painting?

Can the 6 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel be used outdoors without worrying about rust?

When framing the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel, where should the screws be attached?

What are the dimensions of the 10 ft. 29-Gauge Galvalume EF3 Eave Flashing?

Can the 14 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panels be painted?

Can the 10 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel be used on a low pitch roof?

How is the Closure Strip Foam used on corrugated panels?

How do you cover the grooves at the end of the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel in order to keep bugs out?

Is there an option of a natural unpainted galvalume finish for the 12 ft. SM-RIb Galvalume Steel 29-Gauge Roof/Siding Panel?

Is the 12 ft. SM-Rib Galvalume Steel 29-Gauge Roof/Siding Panel strong enough to walk on?

Can the 8 ft. SM-Rib Galvanized Steel 29-Gauge Roof Panel be painted?

Does the 10 ft. Galvanized Steel Water Rain Diverter Drip Edge Flashing tend to catch debris such as small leaves, ball moss, and dirt?

What is the thickness of the 6 in. x 12 ft. Royal Brown Aluminum Smooth Fascia Trim?

How wide are the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panels?

What is the peak to valley and peak to peak dimension for the 12 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel?

How do you attach the 8 ft. Corrugated Galvanized Steel 31-Gauge Roof Panel to an outside brick or foundation wall?

What is the length of the 12 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel?

What are the recommended power tools to cut the 6 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel?

Will the Aluminum Roll Valley Flashing stick on plywood and plastic?

How to cut the 8 ft. Corrugated Galvalume Steel 26-Gauge Roof Panel in Aluminum?

Do you sell coils?

Are there color options available for metal roofing panels?

How long does a metal roof last?

Can metal panels be stored outside, uncovered?

How do metal roofs handle snow and ice?

Are metal roofs noisy during rain?

How do metal roofs perform in high wind areas?

What types of metal roofing panels are available?

How can I avoid the buildup of Chalk?

Are metal roofing panels energy-efficient?

What is "chalk" as it pertains to metal roofing?

How do I clean metal roofing panels?

How do I handle metal roofing panels to aboid damage?

Are there special coatings available for metal roofing panels?

How do I choose the right metal roofing panel for my home?

Are metal roofs fire-resistant?

What should I use for roofing in high ammonia enviromnets like chicken coops?

Can steel roofing be suitable for coastal areas?

Would the 8 ft. Corrugated Galvanized Steel Utility-Gauge Roof Panel work well as deck skirting?

Can the 8 ft. Corrugated Galvanized Steel 29-Gauge Roof Panel material be painted?

Can the 8 ft. Corrugated Galvanized Steel 29-Gauge Roof Panels be used to create a toned-down, industrial look?

Do you sell .040 Aluminum 5V Crimp Metal Roofing Panels?

What is the NOA for your Sem-Lok Panel?

Does installation application affect the metal roofing panel warranty?

How much overlap is needed on metal roofing panels?

What is the white powdery substance on the metal panels.

What is spangle?

What causes a steel roof to have red rust around fasteners and along the valley?

What Kind of Metal Should Be Used for Flashings that Doesn't Have an Adverse Reaction to Galvalume?

See more

Oil Canning

What is oil canning?

SMRIB Profile

How wide is the SM-RIB Metal Roofing Panel?

5V Crimp Profile

What does 5V Crimp mean?

Is the 5V Crimp panel available in different textures?

Is there a variety of Kynar colors available for the 5V Crimp panel?

Does the 5V Crimp panel come in different polyester colors?

Are there any specific certifications for the 5V Crimp panel?

Does the 5V Crimp panel come in different finishes?

See more

Job Packs

Does your company offer Job Packs?

Roofing Accessories

What is a Galvalume screw?

Do metal roofs require underlayment?